EVALSTPM33: Class 0.2, Single-Phase Power Meter with Tamper Monitoring, CT and Shunt Sensing

The STPM33 energy metering evaluation board is a class 0.2, single-phase meter which includes tamper monitoring, CT and shunt current sensors for power line systems with Vnom= 140 to 300 V(RMS), Inom/ Imax= 5/100 A(RMS), flin= 50/60 Hz ± 10% and Tamb= -40 to +85 °C.

Measured active/reactive power can be output from two programmable LEDs on the board. The board can be interfaced with a PC running evaluation software through an isolated RS232 port, or through the STEVAL-IPE023V1 USB isolated interface tool for configuration and data reading. The board also has SPI/UART pins available to interface a microcontroller for application development.

• 0.2% accuracy single-phase meter with tamper monitoring

• Vnom(RMS)= 140 to 300 V, Inom/Imax(RMS)= 5/100 A, flin= 50/60 Hz ± 10%

• Tamper detection though neutral current monitoring

• Connector for USB isolated hardware programmer tool STEVAL-IPE023V1 and PC GUI

• RS232 and UART isolated connectors to PC GUI

• SPI/UART switch for device peripheral selection

• 2 programmable LEDs on board

• Digital expansion to external system-on-chip or MCU

• 3.3 V power supply: external or through STEVAL-IPE023V1 isolated USB board

• IEC61000 standard compliant