STMicroelectronics

STLUX385A

STMicroelectronics presents the world's first universal digital controller for lighting and power-conversion applications

Image of STMicroelectronics' STLUX385ASTMicroelectronics' STLUX385A device is part of the STLUX™ family of STMicroelectronics® digital devices tailored for lighting and power-conversion applications. The STLUX385A has been successfully integrated in a wide range of architectures and applications, starting from simple buck converters for driving multiple LED strings, boost for power factor corrections, half-bridge resonant converters for high-power dimmable LED strings and up to full-bridge controllers for HID lamp ballasts.

Key Features
  • 6 programmable PWM generators (SMEDs) (state machine event driven)
    • 10 ns event detection and reaction
    • Max.1.3 ns PWM resolution
    • Single, coupled and two coupled, operational modes
    • Up to 3 internal/external events per SMED
  • DALI (digital addressable lighting interface)
    • Interrupt-driven hardware encoder
    • Bus frequency: 1.2, 2.4 or 4.8 kHz
    • IEC 60929 and IEC 62386 compliant plus 24-bit frame extension
    • Configurable noise rejection filter
    • Reverse polarity on Tx/Rx lines
  • 4 analog comparators
    • 4 internal 4-bit references
    • 1 external reference
    • Less than 50 ns propagation time
    • Continuous comparison cycle
  • 8 analog-to-digital converters (ADCs)
    • 10-bit precision, with operational amplifier to extend resolution to 12-bit equivalent
    • Sequencer functionality
    • Input impedance: 1 MΩ
    • Configurable gain value: x 1 or x 4
  • Memories
    • Flash and E2PROM with read while write (RWW) and error correction code (ECC)
    • Program memory: 32 Kbytes Flash; data retention 15 years at 85°C after 10 kcycles at 25°C
    • Data memory: 1 Kbyte true data E2PROM; data retention:15 years at 85°C after 100 kcycles at 85°C
    • RAM: 2 Kbytes
    • ROM: 2 Kbytes
  • Integrated microcontroller
    • Advanced STM8® core with Harvard architecture and 3-stage pipeline
    • Max. fCPU: 16 MHz
  • Clock management
    • Internal 96 MHz PLL
    • Low-power oscillator circuit for external crystal resonator or direct clock input
    • Internal, user-trimmable 16 MHz RC and low-power 153.6 kHz RC oscillators
    • Clock security system with clock monitor
  • Basic peripherals
    • System and auxiliary timers
    • IWDG/WWDG watchdog, AWU, ITC
  • Reset and supply management
    • Multiple low-power modes (wait, slow, auto-wakeup, Halt) with user-definable clock gating
    • Low consumption power-on and power-down reset
  • I/O
    • 12 multifunction bidirectional GPIO with highly robust design, immune against current injection
    • 6 fast digital input DIGIN, with configurable pull-up
  • Communication interfaces
    • UART asynchronous with SW flow control
    • I2C master/slave fast-slow speed rate
  • Operating temperature
    • -40°C up to 105°C

STLUX385A

KépGyártói cikkszámLeírásAvailable QuantityÁr
IC DIGITAL CTLR 38TSSOPSTLUX385ATRIC DIGITAL CTLR 38TSSOP3779 - Immediate$1,716.75Részletek megtekintése

Eval Boards

KépGyártói cikkszámLeírásAvailable QuantityÁr
EVAL BOARD FOR STLUX385ASTEVAL-ILL066V1EVAL BOARD FOR STLUX385A3 - Immediate$76,373.15Részletek megtekintése
EVAL BOARD FOR STLUX385ASTEVAL-ILL068V1EVAL BOARD FOR STLUX385A2 - Immediate$13,211.96Részletek megtekintése
Published: 2014-05-22

Related Articles and Blogs

Efficient Smart Lighting with PWM Control Utilizing digital controllers for lighting applications provides system flexibility.
Developing Efficient LED Lighting Control Systems LED lighting control techniques expand as the market continues to grow including dimmable LEDs and networked lighting.
Innovative Solutions Simplify LED Driver Circuits A look at solutions that achieve high efficiency in LED driver circuits using components from Texas Instruments, STMicroelectronics, and ON Semiconductor.